The washing machine consists of two programs: main wash and rinse.

This washer has 1 laundry compartment with a circulation pump spray system and a rinse section. The containers to be cleaned are cleaned by a chain conveyor fed through the compartment. During the main wash, wash water is removed from the pumping tank by a centrifugal pump through a piping system with spray over the container to be washed, in order to clean the container from the inside.

The washer can also perform disinfection functions by heating the water temperature above 82°C or by adding a disinfectant to the rinse water. The heating of the wash water is regulated by a central heating system 95/80ºC (third party supply) and is controlled by the digital temperature control unit within 0.1ºC. Depending on the degree of contamination.

Removal of superfluous fats and proteins is carried out by the pump with the over current principle.

TECHNICAL SPECIFICATIONS:

The specifications shown below for the container/pallet washer are important.

Inlet height : 1000 mm.

Capacity per washing bath: approx. 950 liters.

Transit conveyor: double chain conveyor

Nozzle power : 0.25 kW, 33 rpm

Pump power : 15 kW

Pump capacity : approx. 1000 l/min at 6.2 bar.

Mains voltage : 230/400 V / 3 phases / 50 Hz.

Pump material : stainless steel 304

Heating : Central heating 95°-80° 65kW

Temperature - main wash : 50° - 55°C

Compressed air : 6 bar filtered at min. 50 μ

Maximum limits for correct operation:

- Maximum dimensions of containers / palots = 1200x1000x790 mm.

- Capacity: ± 20 containers/pallets/hour.

Production may vary depending on size.

Incorporates 2 belts:

2700 mm x 1500 mm x 850 mm (lxwxd).

2750 mm x 1350 mm x 850 mm (lxanxal)

Speed: 14 m/min

Power supply: 400 V 3 phases 50 Hz

Capacity: 0,55 kW

.